Saturday, November 16, 2024

Simple Turbo Boost Devices for Turbo Systems


Simple Turbo Boost Devices for Turbo Systems

Simple Turbo Boost Devices for Turbo Systems
A boost controller can be used to control the boost pressure of a turbocharger with an internal wastegate by adjusting the pressure going to the wastegate. A basic boost control setup involves a wastegate and a wastegate actuator, and works without any electronics. 
Here are some steps for installing a boost controller for an internal wastegate:
- Let the engine cool down
- Locate the wastegate actuator port and pressure source on the turbocharger
- Remove the factory boost control solenoid from the boost pressure supply port
- Install the boost controller in the wastegate pressure line, with the wastegate arrow pointing towards the actuator.
- Block any additional ports on the actuator
- Secure all hose ends with hose clamps
- Mount the boost controller bracket and attach the controller to it
- Before making adjustments, turn the boost dial completely counterclockwise 
A boost controller works by modifying the pressure signal sent to the wastegate actuator. This allows the turbo to produce a new boost level.
HardRider Motorcycle
Performance Products | Nitrous | Turbo | Superchargers
Email: info@hardrider.net | Web: hardrider.net
Tel: 1-800-971-5030 | News
CAN/USA ProBoost Distributor | NitroBoost | TTS
Toronto Canada | Lewiston NY USA | Worldwide Shipping

No comments:

Post a Comment

Thank you for your comment. Visit our website at: hardrider.net for more information, products and magazine.